Page 1 of 1
I almost have it! but not quite=)
Posted: Tue Jul 14, 2009 6:43 pm
by della
It looks like I will be able to cut everything separately, I closed off the collar and I would like to cut that by itself also so I can piece everything together. I can't figure out how to make the collar by itself. Please help=)
- choco-cat-wp-1.jpg (91.19 KiB) Viewed 1518 times
Re: I almost have it! but not quite=)
Posted: Tue Jul 14, 2009 7:41 pm
by HeatherM
I set the stoke on the lines you used for the collar edges to black, used the paint bucket to fill it, then deleted the two lines since you need a closed shape for SCAL. I used the node tool to move the top and bottom edges of the collar away from the head and body a little. If you want a solid background mat for this, the easiest way to do that is to select everything, Path/Combine, linked offset. Move the little square until you like the size of the mat. Path/Object to path. You may need to delete inner pieces from the base/mat to make it solid. HTH
Re: I almost have it! but not quite=)
Posted: Wed Jul 15, 2009 7:56 am
by della
Thanks for your help!