Craft Edge

Where is the changelog for SCAL3 3.051? I would like to know what was updated.

when using a black cat or silver bullet, Scal will put the reg marks a set distance from the cut lines. this means they can move if using score lines and then a cutting outline. one way around this is to put a rectangle around the whole thing, this will force scal to put the reg marks around that s...

newbiecat wrote:HI

the short answer is WISIG should be able to be applied
can you attach the file to the post and then we can have a look and see what is going on

Pandora

Sure - the concept is simple, I'll create and attach a file shortly

Hello, (SCAL3 3.046 + BC Pro) I often do print-and-cut (contour cutting) where I make two passes: one for scoring, and one for cutting. Each pass is a layer that I turn off and on. However, because the score and cut lines occupy different positions, the origin point of the cut starts in a different ...

I'd like to see SCAL3 detect and correct for rotation and scale differences when calibration for contour cuts. This would fix these problems: 1) Printer error: A sheet from a printer can come out misaligned (not square) to the edge of the paper. 2) Human error: placement of the paper and mat relativ...

OK, this is now happening a lot. For no apparent reason, it won't print; just spits out a blank sheet of paper, until I reboot.

Thanks gj1 - that wasn't the problem.

I rebooted and it's printing now. very odd.

Make sure the orientation is set to Vertical and see if that will work. Thanks, I double-checked and the printer settings are set to "portrait" as opposed to "landscape." I also ran some tests with the other file I was printing from today, it does noe print anymore. I don't know...

gj1 wrote:Make sure the orientation is set to Vertical and see if that will work.

Thanks, I double-checked and the printer settings are set to "portrait" as opposed to "landscape."

I am aware of the other threads with a similar topic, but there seems to be an issue. Shapes set to "print and cut - print" are not printing. These are shapes created right in SCAL3, with a color fill, but no stroke. When I print, using either the print dialog, or the print-and-cut dialog,...